Exam subjects and training choices for the Cisco CCNP SWITCH Certification
The Cisco CCNP 300-115 Transition exam verifies test-takers' switching skills and expertise in relation to preparing, verifying, and configuring the deployment of multifaceted business switching systems based on the Cisco Enterprise Campus Architecture.
Implementing Cisco IP Switched Networks (CCNP Routing and Switching) is a qualifying test for the CCNP Routing and Switching and CCDP credentials. The exam consists of 30 to 40 questions and has a time limit of 120 minutes to complete. It is only accessible in English and Japanese, and candidates must register with Pearson VUE.
The credential test verifies that you have what it takes to schedule, instal, and check the deployment of Cisco Enterprise Campus Architecture-based multifaceted enterprise switching solutions. This test concerns the extremely stable integration of WLANs and VLANs, which is all that needs to be said.
Topics in the Cisco 300-115 Exam Overview
We'll take a wider look at particular exam topics as outlined by Cisco in this segment. It's worth noting that these goals serve as general instructions for the exam's material. There could be several other fields similar to them that are used in your version of the exam as well.
Furthermore, the rules can be changed at any time without advance warning to the applicants. This ensures that before you start studying for your test, you can review the exam material on the qualification website. You would be able to avoid studying outdated research materials as a result of this.
Certifications by Cisco
CCNA Routing and Swapping Qualification Dumps https://prepaway.net/ccna-routing-and-switching-certification-dumps.html
Routing and Switching CCNA & CCNP
Cisco 200-125 dumps are available at https://prepaway.net/cisco-200-125-dumps.html.
Cisco 300-115 dumps are available at https://prepaway.net/cisco-300-115-dumps.html.
Exams for Specialization
Cisco 200-150 dumps can be found at https://prepaway.net/cisco-200-150-dumps.html.
Cisco 200-105 dumps are available at https://prepaway.net/cisco-200-105-dumps.html.
The Cisco 300-115 SWITCH exam is divided into three sections: Layer 2 Technologies, Infrastructure Security, and Infrastructure Services. Let's take a closer look at them.
65 percent – Layers 2 Technologies
This subject accounts for approximately 65 percent of the total questions on the test. This ensures that during your training, this should be your primary objective. Other subtopics under this theme must be studied in order to be properly qualified for the qualification test.
Candidates must understand how to instal and test transfer administration. They must learn all they can about SDM models, handling the MAC address table, and troubleshooting Err-disable recovery in this section. They should also be able to configure and test Layer 2 protocols such as CDP, LLDP, and UDLD. Until taking the exam, candidates should be able to customise and validate VLANs. Access ports, VLAN database, Normal, voice VLAN, and expanded VLAN are all protected. Configuration and verification of trunking is another field within this objective where students can improve competence.
Dot 1Q, VTPv1, VTPv2, VTMv3, and VTP pruning, as well as Manual pruning and Native VLAN, are all included. Understanding the method of configuring and checking Ether Channels is often important. LACP, PAgP, and manual, Layer 2 and Layer 3, EthernetChannel misconfiguration guard, and load balancing are also part of this. Another field in which you can concentrate is spanning tree setup and verification.
Switch priority, path cost, port priority, and STP timers; PVST+, MST, and RPVST; Loop guard & Root guard; Port Quick, BPDU guard, and BPD filter are among the topics covered by the exam. Other LAN swapping technologies, such as the RSPAN and SPAN, should also be understood and checked. They should also be able to describe chassis virtualization and aggregation technologies like Stackwise.
Security of infrastructure – 20%
Despite the fact that the percentage correlated with this subject is not as high as the one above, individuals must pay particular attention to it and research it thoroughly. It may be the difference between a good grade and a bad one. Candidates must learn how to configure and check some switch protection features under this subject. IP Source Guard, DHCP snooping, Dynamic ARP inspection, Storm monitoring, port protection, and Private VLAN are some of the features available. Furthermore, candidates should be able to demonstrate system protection using Cisco IOS AAA with RADIUM and TACACS+. Local privilege permission fallback, AAA with RADIUS, and TACACS+ are all protected.
Infrastructure Services accounted for 15% of the total.
This section necessitates the test takers comprehend the method of configuring and verifying first-hop redundancy protocols. HSRP, GLBP, and VRRP are also covered. This subject, like the previous one, has a low percentage, but knowing it can make a small difference in your qualification exam performance.
It is important to note that the percentage for each subject reflects the number of questions that may be predicted from that topic. It's important to pay careful attention to these figures in order to recognise what to concentrate on during your research.
Options for Cisco 300-115 Exam Preparation
There are many options available to help you prepare for the Cisco 300-115 test. Cisco maintains a collection of educational resources on its website, which you can review. Let's have a peek at some of them right now.
Classroom instruction
Cisco has certified learning partners all over the world that take candidates to instructor-led courses. The suggested preparation for the 300-115 SWITCH test can be found on the qualification website.
PrepAway is a service that allows you to prepare meals quickly
For the Cisco 300-115 test, the credential provider often provides self-paced online courses and study materials. Implementing Cisco IP Switched Networks (SWITCH v2.0), Cisco Certification Practice Test, and Cisco learning laboratories for CCNP SWITCH are also recommended instruction for students. On the qualification tab, you'll find connections to these e-learning tools. Prepaway (https://prepaway.net/) is a website that helps people prepare for
Mock experiments are simulations of actual tests.
Finally, you must devote more time to practise studies. This will aid in the development of the test-taking and time-management abilities. In this respect, PrepAway has ample preparation resources to bring you off to a great start.
Other helpful links
In addition to the tools mentioned above, you should look at book resources to help you prepare for your exams. You may also enter a few research groups to benefit from the experience of other test takers. In order to be properly prepared for the final test, you could carry out the hands-on lab environments. The ties to the hands-on lab environments and the research community can be found on the qualification website.
final thoughts
There are several research resources available to aid you in your exam planning, and you can make use of them all. Regardless of how challenging the subject is, with appropriate preparation and trained assistance from IT experts, water may be extracted from a flint. Make full use of the planning tools to achieve excellent performance.
Comments
Post a Comment